Plate Heat Exchanger
A plate heat exchanger consists of a frame, which consists of a front cover, rear (movable) parts, carrying bar, guiding bar, and a number of tie bolts depending on the type of the plate heat exchanger. In between front and rear frame, a number of plates are pressed together. When the plate pack is placed between two frames, it is tightened to minimum distance which results for the plate heat exchanger to work under certain pressures. The heat is transferred from one medium to another one through plates, which have been pressed. The hot and cold medium flows through between each of the plate and then they Exchange their heat without mixing each other.
- Pulp and Paper
- Edible Oil Industry
- Chemical Industry
- Surface Treatment
- Sugar Industry
- Steel Industry
- Extile Industry
- Automotive Industry
For more details please contact +974 31104553 , firstname.lastname@example.org
- Gasketed Type PHE
- Plate Heat Exchanger
- AWG Series
- ASW Series
- ADP Series
Plate Heat Exchanger
Plate Heat Exchangers are used in various applications due to its flexibility. Its optimum design offers the most economic solution for heat transfer duties from HVAC to Oil&Gas market.
plate types have channel depth of 2.30mm and 4.00 mm depending on the plate model. As a result of its wide range of plate models and types with different chevron angles, it can even reach up to 1°Celcius.
- Hang-on type (glue free) gaskets for ease of servicing
- Even distribution of fluid as a result of high turbulence distribution area
- Self aligning plate pack for easier assembly
- Available from DN32 to DN500 with different thickness and materials.
AWG Series plate heat exchangers are wide gap types provide larger free flow channels compare to other gasketed types. It can handle fluids containing fibers or high viscous media which normally clog A series types with small free flow channels.
Wide Gap Plate Heat Exchangers offer 12mm free flow channel and still provide turbulent flows to achieve high heat transfer performance.
- No contact of plates which minimizes clogging
- Only glued gasket types
- Superb performance with fluids containing solid particles
- Extreme performance in Sugar, Ethanol, Textile and other key industries.
ASW Series is semi welded plate heat exchangers. The difference is one plate pack is laser welded together which eliminates the use of gaskets. On the other side the plate pack is gasketed which are not welded together. In many cases gaskets may not handle some type of gases and fluids; therefore semi welded plate heat exchangers are used where the gas or fluid does not have contact with gasket.
ASW Series – Plate Heat Exchangers can be cleaned and unpacked as normal gasketed type plate heat exchanger.
ADP Series are Double Plate Heat Exchangers; it is also known as double wall plate type. It is used as fail safe method to avoid contamination of two fluids during heat transfer. ADP Series plate heat exchangers are gasketed type like A series and it can be cleaned easily as any another gasketed type plate heat exchanger.
In case of the fluid cracking the plate, the fluid runs out of the plate heat exchanger through the compressed plates which instead of mixing with the other media. This basically minimizes the potential contamination of fluids. It is extremely important to use double plate type in drinking water, pharmaceutical and cooling transformer oil applications.